[. . . ] Install all batteries correctly, + and ­ as marked on the remote control. RECALL TV Mode Selected Mutes Audio OSD Menu for TV setting Select Input Audio Increase/Decrease Channel Return Notes: 1. [. . . ] When press the TV button, the remote will get in TV function mode, each time when press the TV function button, the LED will flash "RED" light. When in DVD mode, each time when press the DVD function button, the LED will flash "GREEN" light. Some of buttons are designed for operating single disc DVD player, pls read the DVD manual to operate the DVD player 1 Remote Operation (2) Button 1 MENU Descriptions Included Remote 1. Press again to navigate options TUNER MODE (RF input mode) AUDIO OUTPUT (audio output mode) CHANNEL SKIP (channel skip mode) RESET:(restore to factory default value) 3. OSD menu will disappear 6 seconds after no input. 2 3 4 / VOLVOL+ Browse and select an option for a item in the OSD menu Decrease the volume of sound. JENSEN TV-specific OSD (On Screen Display) Control MENU ITEMS TUNER MODE 5 A/P Scan all channels in CATV and AIR modes and save channels that are detected. OPTIONS 6 CH+ If "CHANNEL SKIP" is ON: Will tune TV to next available channel. All settings are saved to non-volatile memory when OSD disappears. th th 4. Adjust the volume of Audio Output 4-1 4-2 Press the [ VOL + ] button to increase the audio volume. Press the [ VOL - ] button to decrease the audio volume. ( Approximate 6 seconds for storage) 6. Adjust the IBOX 200's System Settings Press [ MENU ] button to activate the setting menu. Press [ ] or [ ] to browse and select a tuner mode from "AIR" and "CATV". The 2 nd menu item is "AUDIO OUTPUT". Press [ ] or [ ] to browse and select an option from "STEREO", "MAIN", "SUB" or "MONO" depending on the audio signals available in the TV signal. 3 Installation Instructions 1. [. . . ] Press [ ] or [ ] to browse and select a tuner mode from "AIR" and "CATV". The 2 nd menu item is "AUDIO OUTPUT". Press [ ] or [ ] to browse and select an option from "STEREO", "MAIN", "SUB" or "MONO" depending on the audio signals available in the TV signal. 3 Installation Instructions 1. [. . . ]